Expert Answers about Chevrolet Boat Trailer Parts
- Availability of Trailer for SunDolphin Pro 102 Fishing Boat
- We do indeed sell a trailer that would work well for your Sundolphin Pro 102 fishing boat. The CE Smith Boat Trailer, part # CE48810 works for small boats and PWC's up to 12 feet long weighing up to 800 lbs. Since your boat is 10 foot 2 inches long and weighs about 250 lbs, your boat will work with the CE Smith trailer perfectly.
Assembly is required, and all necessary parts and hardware are included. All the licensing and registering paperwork is also included so you can easily get the...
view full answer... - Adding Roller Guide-Ons to Boat Trailer Carrying Drift Boat
- We can help you with roller guide-ons for your trailer that carries your drift boat, or dory as they are sometimes known. The linked page will show you all such items we offer.
I suggest you take a look at the CE Smith Roller-Style Guide-Ons for Boat Trailers, part # CE27610, and also Fulton part # FBGR200101. The CE Smith rollers would be my preference between the two because they will be gentler on the hull.
If you want to add roller bunks to your trailer to make it easier to load the...
view full answer... - Availability of Corrosion Resistant Brake Assemblies for Boat Trailer
- Because electric brake assemblies like the etrailer.com self adjusting brake assembly part # AKEBRK-7L-SA are not typically used for boat trailers, the assemblies are not specially coated for saltwater corrosion resistance.
Boat trailers usually use hydraulic brakes, and would use a hydraulic brake assembly like part # 42029 and # 42028. These assemblies are galvanized for corrosion resistance.
To convert to hydraulic brakes, you would need a hydraulic coupler/actuator like part # 099-175-00....
view full answer... - Wobble Roller for EZ Loader Boat Trailers
- We carry one wobble roller, # YR500YW-8PEZ, that is specifically found on EZ Loader Boat Trailers. It is possible that other replacement parts would fit but as far as manufacturers specifically calling out EZ Loader trailers this roller is all we have.
view full answer... - Can CE Smith Sport Boat Trailer Carry 10 Foot Porta Boat
- The CE Smith Sport Boat Trailer part # CE48810 can be used with your Porta-Bote. Since the bunks are adjustable in width and in angle relative to the hull of the boat this could easily accommodate what you have.
view full answer... - Combination Keel/Caster Roller Assembly for Tandem Axle Shorelander Boat Trailer
- A keel roller is not designed to carry the bulk of a boat's weight. That is the job of the bunks, whether they are wobble roller bunks like yours, standard roller bunks or carpeted bunks. Also, it is not a good idea to mount any of these boat support components to the trailer axles. Doing so would allow the forces from bumps to be transmitted directly to the boat's hull. All items that support the boat itself should be mounted to the trailer frame, which is then isolated from the road by...
view full answer... - Angled Winch Mounting Bracket Recommendation for a Boat Trailer
- Sounds like you are looking for a winch angle mounting bracket like the part # DL24110. This is a right-angle mounting bracket that you see used on boat trailers like you mentioned.
view full answer... - Boat Winch That is Rated for a 10,000 lb Boat
- The heaviest duty boat trailer hand winch that we have is the Fulton XLT 2-Speed Trailer Winch - 10" Long Handle - 20' Strap - Zinc - 3,200 lbs # F142425, which is rated for 3,200 lbs.
The closest winch that we have to 10,000 lbs for your boat is the Dutton-Lainson StrongArm Electric Winch - Marine, part # DL25215, which is rated for 9,000 lbs. This is an electric winch that should get the job done for you. You will need to use a 12V battery to be able to utilize this winch.
If you have...
view full answer... - Converting 19-ft V-Hull Boat Trailer to Pontoon Trailer
- We do not have a single item kit to convert a boat trailer from a V-hull setup to a pontoon setup but we do offer all sorts of parts for boat trailers that appear on the linked page.
It is possible that a given trailer maker could offer such a kit made to convert one of their trailer models to another so it might be worth checking with the manufacturer. If nothing else this gives you the opportunity to ask safety-related questions about this idea. I suggest having the trailer's VIN handy...
view full answer... - Available Sizes of Boat Trailer Bunk and Bolster Brackets for Wooden Bunk Boards
- We have bunk brackets and bolster brackets for boat trailer bunk boards in various sizes that you can see on the two linked pages. An example is the 11-inch CE Smith 4-piece Bolster and Swivel Bracket kit # CE10001G-4. I also linked our main page for all boat trailer parts.
view full answer... - Replacement Installation Hardware Kit for CE Smith Post-Style Guide-Ons CE27670
- Many of our boat trailer guide-on kits like Fulton 16-Inch Cushioned Rollers # FBGR200101 include mounting hardware that will accommodate your trailer's 2 x 4-inch frame. The CE Smith Replacement Hardware Kit for CE Smith Post-Style Guide-Ons, part # CE11452-A that you referenced, will fit your frame and are usable with several different models of their guide-ons, such as # CE27670.
All boat trailer parts including hardware kits are shown on the linked page.
view full answer... - Need Bright Backup Light on Boat Trailer for Nighttime Use
- We do offer a super-bright LED-type backup light that is fully submersible, part # BUL52CB from Optronics. This 36-LED light uses a 2-wire pigtail # A45CB for connection and can be mounted using rubber grommet # a70gb along with steel bracket # BK70BB.
LED lighting combines high-efficiency with high light output and this unit should serve you well without placing much additional load on your trailer wiring.
view full answer... - Galvanized Roller Bunks for 23 ft Boston Whaler Conquest on EZ Loader Trailer
- Bunk rollers like the # DL21755 model would be a good addition to your trailer, and would make launching and retrieving your boat easier. The rollers would cause less friction between the boat and the bunks, therefore requiring considerably less effort to winch the boat up onto the trailer.
For a comparable galvanized product, I would recommend part # DL21741, with each 5 foot section having a 3000 lb capacity per pair of rollers. These rollers can be fastened directly to the edge of your...
view full answer... - Availability of Powered Side Mount Jack for Boat Trailer
- The Lippert # LC69VR jack is meant for an A-Frame trailer and wouldn't be compatible with a straight or pole tongue trailer like what's used on a boat trailer without extensive fabrication work.
This being said, we do have a side-mount powered trailer jack that would work well for you, The Fulton XLT, part # F141401. The jack has a 2500 lb lift capacity, as long as the tongue weight of your boat and trailer is under 2500 lbs, the jack would work great for you. The jack bolts into place,...
view full answer... - Is Boat Trailer Roller Bracket Available For Rollers That Use 5/8 Inch Shaft
- The Side Angle Mounting Brackets for Boat Trailer Rollers, part # CE10211G, you referenced have a 3/8 inch hole used for attaching boat trailer roller shafts. Drilling the hole out on this bracket could compromise the integrity of the bracket and would not be recommended.
We do have brackets that may work for you if you have the mounting space available. They are part # CE10500G. The mounting slots on these brackets are 1/2 in wide x 5 in tall.
view full answer... - Replacement Roller Guides for Pontoon Boat Trailer
- We do offer a variety of pontoon boat trailer guide-on and roller products that you can see by clicking on the link provided. I reviewed photos of Tracker Trailstar pontoon boat trailers and noted some are equipped with post-style guide-ons like # CE27670 while others show roller-style guide-ons like # CE27672.
Please feel free to submit photos of your trailer if you have any trouble finding the replacement parts you need.
view full answer... - Available Types of Boat Trailer Guide Ons
- We have bunk style guide-ons for boat trailers such as 60-inch bunk kit # CE27600, roller type kits like # CE27610 and also post style kits like # CE27640. You can see items on the linked page. All of these kits use mounting brackets that give you some sideways adjustment capability so the guide ons will be at the right positions for your hull.
We also have complete roller bunk kits like # DL21741 and other boat trailer parts that are shown on the other linked pages.
view full answer... - Availability of 3-Inch Bow Roller for Boat Trailer
- We do offer 3-inch bow rollers and all can be seen on the linked page. These are offered in various materials including basic black rubber like # YR3143-4 and non-marking thermoplastic compounds like part # YR300B. All fit on a 1/2-inch shaft like the one included in CE Smith Keel Roller Assembly # CE32003G.
view full answer... - Winch Recommendation for Winching 600 lb Jon Boat and Trailer Up Incline
- The higher the rating for the winch the easier it will be to winch your boat and trailer up the incline.
The Dutton-Lainson Hand Winch, TUFFPLATE Finish, Two Speed with Direct Drive # DL14730 that you referenced has a 2,000 lb capacity so it should work very well to winch in your 165 lb jon boat and trailer that weighs total around 600 lbs. This two speed jack will has ratios of 12.4:1 and 5.4:1.
For a strap you would then want the part # DL24249. This is 25 feet long.
I also attached...
view full answer... - Recommended Boat Bunks for a Continental Boat Trailer Carrying a 22 Foot HydroSport
- Yes, in addition to 2 x 4 bunk boards like # CE27840, we currently offer a few roller bunks. One I recommend is the Dutton-Lainson deluxe roller bunk # DL21741 because of the non-marking rollers. Also, they are galvanized steel (resists corrosion) and each 5 foot section has a 3,000 pound capacity per pair of rollers.
These rollers can be fastened directly to the edge of your existing bunk boards, or the brackets part # DL21742 can be used. You would need 4 of them to mount a pair of roller...
view full answer...
Go To Results